EOCRSE2-60NS

نقطة مساعدة للكونتاكتور (1NO+1NC-2A)

The Schneider A9C20731 is a high-performance modular contactor designed for the seamless control of heating, lighting, and ventilation circuits. Part of the premier Acti9 iCT range, this 1-Pole contactor features a Normally Open (1NO) contact and is rated for 25A. It is engineered to provide a reliable interface between control devices (like timers, thermostats, or smart switches) and high-power electrical loads.

Designed specifically for DIN rail mounting, the A9C20731 is only 18mm wide, making it an essential space-saver for crowded distribution boards. Its 230-240V AC 50Hz coil is perfectly matched for the Egyptian power grid, ensuring stable operation. With a focus on longevity and low power consumption, this contactor is a staple for professional electrical installations in residential towers and commercial centers across Egypt.

Technical Features:

Compact 1-Module Width: Standard 18mm size allows for maximum density in electrical panels.

25A Operational Current: Ideal for managing water heaters, LED lighting banks, and small motors.

High Switching Frequency: Rated for up to 100 switching operations per day, ensuring industrial-grade durability.

Safe Termination: Features tunnel terminals for secure wire clamping and reduced heat at connection points.

Vivid Status Indication: Clear front-face mechanical indicator shows the contact position at a glance.

EcoStruxure Ready: Fully compatible with Schneider’s smart energy management ecosystem.

Schneider A9C20732 is a professional-grade Silent Contactor from the renowned Acti9 iCT range. Specifically engineered for noise-sensitive environments, this 2-pole contactor operates with minimal acoustic hum and switching noise. Rated at 25A with 2 Normally Open (NO) contacts, it is the ideal solution for controlling lighting circuits, small water heaters, and air conditioning units in high-end residential and commercial projects.

Designed to fit seamlessly into standard DIN rail distribution boards, the iCT silent contactor ensures a long electrical life even under heavy switching frequencies. For the Egyptian market—where home automation and high-spec building standards are rising—the A9C20732 offers a reliable, "whisper-quiet" performance that standard contactors cannot match. Its compact 18mm width saves valuable space in your consumer unit while providing industrial-strength switching power.

High-Ranking Technical Features:

Silent Operation: Specialized internal design eliminates the loud buzzing and clacking common in standard contactors.

25A Load Capacity: Robust enough for powerful LED lighting arrays and small HVAC loads.

2-Pole (2NO) Configuration: Full isolation of both Phase and Neutral for maximum safety.

Standard 230-240V Coil: Fully compatible with the Egyptian electrical grid for stable performance.

Compact 18mm Width: Occupies only one standard module in your electrical panel.

High Mechanical Endurance: Tested for 1,000,000 switching cycles for long-term maintenance-free operation.

The Schneider A9C20833 is a high-performance 3-pole modular contactor designed for professional-grade switching in Three-Phase (400V) electrical networks. Rated at 25A with 3 Normally Open (3NO) contacts, it serves as a reliable interface for controlling 3-phase motors, industrial lighting banks, and large ventilation systems.

Part of the premium Acti9 iCT range, the A9C20833 is engineered for high-frequency switching and a long electrical lifespan. Its 220-240V AC coil is perfectly matched for standard control circuits in Egypt, allowing for seamless integration with PLCs, timers, or smart controllers. With a compact 36mm width (2 modules), it provides high-density power control, making it an essential component for modern industrial panels and smart commercial building automation.

High-Ranking Technical Features:

3-Phase Power Control: Specifically designed for balanced switching of all three phases simultaneously.

25A Rated Operational Current: Robust enough for 3-phase motors up to approx. 4kW (5.5 HP).

Compact 36mm Footprint: Occupies only two standard modules on a DIN rail, saving valuable space.

Low Power Consumption Coil: Optimized to reduce heat dissipation within the electrical enclosure.

Visual Status Indicator: Mechanical flag on the front face for immediate "ON/OFF" diagnostic.

Universal DIN Rail Mounting: Compatible with all standard 35mm DIN rail systems (Acti9, Resi9, etc.).

Schneider A9C20834 is a premium 4-pole modular contactor engineered for total electrical isolation in Three-Phase and Neutral networks. Rated at 25A with 4 Normally Open (4NO) contacts, it is the industry standard for switching large LED lighting banks, industrial HVAC systems, and heavy-duty 4-wire power distribution circuits.

As part of the elite Acti9 iCT range, the A9C20834 ensures simultaneous switching of all four lines, providing complete safety during maintenance and fault conditions. Its 220-240V AC coil is optimized for the Egyptian electrical grid, allowing seamless integration with PLCs, Building Management Systems (BMS), or smart home controllers. With a width of only 36mm (2 modules), it offers the highest density of 4-pole switching in a standard DIN rail profile, making it a critical component for professional electrical panels.

High-Ranking Technical Features:

Total 4-Pole Isolation: Switches three phases and the neutral simultaneously for enhanced safety.

25A Current Rating: Robust performance for 3-phase resistive loads and medium-sized motors.

Space-Saving 36mm Design: Fits 4 poles into a 2-module space, optimizing your distribution board layout.

Industrial Durability: Rated for up to 1,000,000 mechanical switching cycles.

Visual Fault Diagnosis: Features a clear mechanical indicator on the front face for contact status.

Cool Operation: Low-consumption coil design reduces heat build-up inside the panel.

كونتاكتور صامت CT - NO 2P * 40 A
Schneider Electric Acti9 iCT is a modular contactor. It is a 2P remote control device with 2 normally open contacts. The rated current is 40A for AC-7a and 15A for AC-7b.

كونتاكتورصامت CT - NO 4P * 40 A
Schneider Electric Acti9 iCT is a modular contactor. It is a 4P remote control device with 4 normally open contacts. The rated current is 40A for AC-7a and 15A for AC-7b.

كونتاكتور صامت CT - NO 2P * 63 A
A9C20862 Schneider Electric Acti9 iCT is a modular contactor. It is a 2P remote control device with 2 normally open contacts. The rated current is 63A for AC-7a and 20A for AC-7b.

CT -3 NO 3P *63 A كونتاكتور صامت
A9C20863 Schneider Electric Acti9 iCT is a modular contactor. It is a 3P remote control device with 3 normally open contacts. The rated current is 63A for AC-7a and 20A for AC-7b.

كونتاكتور صامت CT - NO 4P * 63 A
A9C20864 Schneider Electic Acti9 iCT is a modular contactor. It is a 4P remote control device with 4 normally open contacts. The rated current is 63A for AC-7a and 20A for AC-7b.

CT - NO 2P * 100 A كونتاكتور صامت
A9C20882 Schneider Electric iCT 100A 2NO 220...240V 50Hz contactor

CT - NO 4P * 100 A كونتاكتور صامت
A9C20884 Schneider Electric Acti9 iCT is a modular contactor. It is a 4P remote control device with 4 normally open contact. The In rated current is 100A for AC-7a.

EOCR-SE2 05 N 24~240V Standard

Range of product - EOCR
Device short name - EOCR-3D420
Product or component type - Protection relay
Protection type - Overload, In > OC setting
Sensitivity to phase loss
Sensitivity to phase reverse
Locked rotor, In > 3 times OC setting
Phase unbalance, 50 %

Product specific application - Overcurrent protection
Analogue output range - 4...20 mA
Network type - AC
Network frequency - 50...60 Hz
protection ajustment range - 0.5…10 A
Tripping threshold - 0.5...6 A

CONTACTS BLOCK

LC1D09E7
3P CONT 9A AC3 4KW 1NO 1NC 48VAC COIL

LC1D09F7
3P CONT 9A AC3 4KW 1NO 1NC 110VAC COIL

The Schneider LC1D09M7 is a high-reliability 3-pole contactor from the world-renowned TeSys D range. Designed for motor control applications up to 4kW (5.5 HP) at 400V, it features a 220V AC (50/60 Hz) control coil, which is the standard voltage for electrical installations in Egypt.

This contactor is celebrated for its long mechanical and electrical life, providing a secure and durable solution for HVAC systems, pumps, conveyors, and industrial machinery. It comes pre-equipped with 1NO + 1NC built-in auxiliary contacts, allowing for immediate integration into signaling or interlocking circuits without needing extra blocks. Its compact 45mm width and DIN rail mounting make it the ultimate space-saving component for professional panel builders.

Key Technical Features:

Standard 220V AC Coil: Perfectly suited for the Egyptian power grid M7 code signifies 220V).
High Durability: Engineered for up to 15 million mechanical cycles, ensuring low maintenance.
Integrated Auxiliary Contacts: Built-in 1 Normally Open (NO) + 1 Normally Closed (NC) contacts for versatile control logic.
Easy Installation: Standard 35mm DIN rail mounting and high-clarity terminal markings.
Safety & Compliance: Fully compliant with IEC 60947-4-1, ensuring maximum safety for personnel and equipment.